Sony DCR-TRV33 PIXELA ImageMixer v1.5, Руководство по обслуживанию

Страница: 111 / 229

103
Editing
You can make up to 2 titles and store them in the memory of your camcorder. Each title
can have up to 20 characters.
The POWER switch should be set to or .
Operate by touching the panel.
( 1 ) Press FN to display PAGE1.
( 2 )
Press MENU to display the menu.
( 3 ) Select TITLE in , then press EXEC (p. 181).
( 4 ) Select , then press EXEC.
( 5 ) Select CUSTOM1 SET or CUSTOM2 SET, then press EXEC.
( 6 )
Select a desired character. Repeat pressing a key to select a desired character
on the key.
( 7 ) Press c to move the cursor to select the next character. Repeat the same
procedure as steps 6 and 7 to complete your title.
( 8 )
Press SET. The title is stored in memory.
To return to FN
Press EXIT.
To change a title you have stored
In step 5, select CUSTOM1 SET or CUSTOM2 SET, depending on which title you want
to change, then press EXEC and enter the new title.
If you take 5 minutes or longer to enter characters during tape recording standby
with the cassette inserted in your camcorder
The power automatically goes off. The characters you have entered remain stored in
memory. Set the POWER switch to OFF (CHG) once and then to CAMERA again, then
start again from step 1.
We recommend setting the POWER switch to VCR or removing the cassette so that
your camcorder does not automatically turn off while you are entering title characters.
To erase the character
Press C . The last character is erased.
To enter a space
Press c .
Making your own titles
4 5 7
&? ! ABC DEF T t
678
90
123
45
MNO JKL GH I
SET ’ . ,
/
–
WXY
Z
TUV PQR
S
[ PARTY_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ]
EXIT TITLE SET
TITLE SET
CUSTOM1 SET
CUSTOM2 SET
EXIT
RET. EXEC
R r
&? ! ABC DEF T t
678
90
123
45
MNO JKL GH I
SET ’ . ,
/
–
WXY
Z
TUV PQR
S
[ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ]
EXIT TITLE SET