6-50
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
5.
G Sensor Check
Click the
[G Sensor Check]
button on the SERVICE MODE screen,
and the following screen will appear.
If the
[Reset]
button is clicked, the Camcorder is reset and it is
restarted, and then the “G SENSOR CHECK” screen will appear.
Using method:
Click the
[Start]
button, and the G sensor check will start.
During execution of G sensor check, the conditon of G sensor is
displayed.
Click the
[Top]
button, and the following message will be displayed.
If the
[OK]
button is clicked, and Camcorder is reset and it is re-
started, and then the SERVICE MODE screen will come back.
6.
Record Data
Click the
[Record Data]
button on the SERVICE MODE screen,
and the “RECORD DATA” screen will appear.
The record data such as use record and self-diagnostic record are
displayed.
Initializing method (Self-Diagnosis Data Only):
Click the
[Clear Self-Diagnosis Data Only]
button on the screen, and
the Self-Diagnosis Data will be initialized.
Initializing method (All Record-Data):
Click the
[Clear All Recorded-Data]
button on the screen, and the
All Recorded-Data will be initialized.
Note:
Performing the initialization causes all the user settings
including time setting to be initialized, too.
