1
Table of c
on
ten
ts
U
seful r
ec
or
ding t
echniques
Inde
x
GB
Step 2: Turning the power on, and setting the
date and time
1
Open the LCD screen of your camcorder.
Your camcorder turns on.
2
Select the desired geographical area by selecting
/
with
/
of the
multi-selector, keep pressing the center of the multi-selector until the
desired geographical area is turned on a light.
See page 17 for the detail of using the multi-selector.
To set the date and time again, operate the multi-selector to select
(MENU)
[Show
others]
[CLOCK/ LANG] (under [GENERAL SET] category)
[CLOCK SET]. When an
item is not on the screen, select
/
until the item appears.
3
Select [NEXT] with
of the multi-selector, then press the center of the
multi-selector.
4
Select setting of [SUMMERTIME] with
/
of the multi-selector, and press
the center of the multi-selector.
If you set [SUMMERTIME] to [ON], the clock advances 1 hour.
POWER lamp
Multi-selector
