20
GB
Connect the supplied AM/FM antennas (aerials) for listening to the radio.
Terminals for connecting the antennas (aerials)
Notes
• To prevent noise pickup, keep the AM loop antenna (aerial) away from the system and other components.
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
• When you connect the supplied AM loop antenna (aerial), cord (A) or cord (B) can be connected to either terminal.
Tip
If you have poor FM reception, use a 75-ohms coaxial cable (not supplied) to connect the system to an outdoor FM
antenna (aerial) as shown below.
Step 2: Antenna (Aerial) Hookups
Connect the
To the
AM loop antenna (aerial)
AM terminal
FM wire antenna (aerial)
FM 75
Ω
COAXIAL jack
L
R
FRONT L
WOOFER
CENTER
SPEAKER
FRONT R
WOOFER
OUTPUT(TO TV)
EURO AV
AUDIO IN
L
R
AUDIO IN
L
R
VIDEO
SAT
COAXIAL
AM
FM
75
DIR-T1
AM loop antenna (aerial)
FM wire antenna (aerial)
AM
A
B
COAXIAL
AM
FM
75
Outdoor FM
antenna (aerial)
System