Ad
v
a
nc
ed Settings and Adjus
tments
91
GB
x
[DISTANCE (SURROUND)]
When you move the surround speakers, be sure
to set the parameters of the distance (
B
) from
the listening position to the speakers.
You can set the parameters from 0.0 to 7.0
meters.
3)
When you perform the Quick Setup (page 27), the
default settings are changed.
4)
This item appears when you set [SURROUND] to
[YES] in the [CONNECTION] setting.
Note
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• When the speaker distance setting is not in the
recommended range,
X
/
x
** m is displayed
(** being the number).
X
indicates over the
recommended distance.
x
indicates below the
recommended distance.
x
[LEVEL (FRONT)]
You can adjust the sound level of the front
speakers, center speaker, and subwoofer. Be
sure to set [TEST TONE] to [ON] for easy
adjustment.
5)
This item appears when you set [CENTER] to
[YES] in the [CONNECTION] setting.
x
[LEVEL (SURROUND)]
You can adjust the sound level of the surround
speakers. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
6)
This item appears when you set [SURROUND] to
[YES] in the [CONNECTION] setting.
x
[TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
Adjusting the speaker level by
using the test tone
1
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
2
Press
X
/
x
to select
[SETUP],
then press
.
The options for [SETUP] appear.
[L/R]
3.0 m
3)4)
Set the surround speaker
distance.
B
[L/R]
0.0 dB
Set the front speaker level
between –6.0 dB and +6.0 dB.
[CENTER]
0.0 dB
5)
Set the center speaker level
between –6.0 dB and +6.0 dB.
[SUBWOOFER]
0.0 dB
Set the subwoofer level
between –6.0 dB and +6.0 dB.
[L/R]
0.0 dB
6)
Set the surround speaker level
between –6.0 dB and +6.0 dB.
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
continued