90
GB
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
x
[CONNECTION]
If you do not connect center or surround
speakers, set the parameters for [CENTER] and
[SURROUND]. Since the front speaker and
subwoofer setting is fixed, you cannot change
them.
x
[DISTANCE (FRONT)]
When you move the front speakers and center
speaker, be sure to set the parameters of the
distance (
A
) from the listening position to the
speakers.
You can set the parameters from 0.0 to 7.0
meters for the center speaker.
1)
When you perform the Quick Setup (page 27), the
default settings are changed.
2)
This item appears when you set [CENTER] to
[YES] in the [CONNECTION] setting.
Settings for the Speakers
[SPEAKER SETUP]
[FRONT]
[YES]
[CENTER]
[YES]: Normally select this.
[NONE]: Select this if no center
speaker is used.
[SURROUND]
[YES]: Normally select this.
[NONE]: Select this if no
surround speaker is used.
[SUBWOOFER]
[YES]
SPEAKER SETUP
DISTANCE(FRONT):
CONNECTION:
DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE
FRONT:
CENTER:
SURROUND:
SUBWOOFER:
YES
YES
YES
YES
[L/R]
3.0 m
1)
Set the front speaker distance.
[CENTER]
3.0 m
1)2)
Set the center speaker
distance.
[SUBWOOFER]
3.0 m
1)
Set the subwoofer distance.
A
