Oth
e
r Op
er
ati
o
n
masterpage:Right
specdef v20070110
filename[E:\sagyou\080603\OLD\3398072142\3398072142\3398072142DAVF500CA2\gb09oth.f
m]
model name [DAV-F500]
[3-398-072-
14
(2)]
99
GB
Changing the Input Level
of the Sound
Distortion may occur when you listen to a
component connected to the TV (AUDIO IN)
jack on the control unit. Distortion is not a
malfunction and will depend on the component
connected.
To prevent distortion, reduce the input level on
the control unit.
1
Press FUNCTION repeatedly until “TV”
appears in the front panel display.
2
Press SYSTEM MENU.
3
Press
X
/
x
repeatedly until
“ATTENUATE” appears in the front
panel display, then press
or
c
.
4
Press
X
/
x
to select a setting.
• “ATT ON”: You can attenuate the input
level. The output level is changed.
• “ATT OFF”: Normal input level.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
Enjoying the Sound at
Low Volume
You can enjoy sound effects or dialogue, as you
would in a movie theater, even at low volume. It
is useful for watching movies at night.
Press NIGHT.
“NIGHT ON” appears in the front panel display
and the sound effect is activated.
Note
• When sound is output from the center speaker, this
effect is more pronounced, as speech (movie dialog,
etc.) is easy to hear. When sound is not output from
the center speaker, or you connect the headphones to
the surround amplifier, the system optimally adjusts
the volume.
To turn off the sound effect
Press NIGHT again.
X
/
x
/
c
,
SYSTEM
MENU
FUNCTION
NIGHT