Sony DAV-DZ850KW, Руководство по эксплуатации

Страница: 94 / 124

94
GB
Be sure to change the value in the Setup Display
when you move the speakers.
1)
When you perform the Quick Setup (page 23), the
default settings are changed.
2)
0.00 to 7.01 meters for North American models.
3)
3.04 m/10 ft for North American models.
Note
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• When the speaker distance setting is not in the
recommended range, / ** m is displayed (**
being the number). indicates over the
recommended distance. indicates below.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
To adjust the volume of all the
speakers at one time
Turn the VOLUME control on the unit, or press
/– on the remote.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
Adjusting the speaker level by
using the test tone
1
Press DISPLAY when the system is
in stop mode.
The Control Menu display appears.
2
Press X / x to select [SETUP],
then press .
The options for [SETUP] appear.
3
Press
X
/
x
to select [CUSTOM], then
press .
The Setup Display appears.
4
Press X / x repeatedly to select
[SPEAKER SETUP], then press or
c .
[L/R]
3.00 m/10 ft
1)3)
(appears when you
set [SURROUND] to
[YES] in the
[CONNECTION]
setting.)
Surround speaker distance
from the listening position can
be set from 0.00 to 7.00
meters
2)
(0 to 23 ft).
[L/R]
0.0 dB
Set this between –6.0 dB and
+6.0 dB.
[CENTER]
0.0 dB
(appears when you
set [CENTER] to
[YES] in the
[CONNECTION]
setting.)
Set this between –6.0 dB and
+6.0 dB.
0.00 - 7.00 m
2)
/
0 - 23 ft
[SUBWOOFER]
0.0 dB Set this between –6.0 dB and
+6.0 dB.
[L/R]
0.0 dB
(appears when you
set [SURROUND]
to [YES] in the
[CONNECTION]
setting.)
Set this between –6.0 dB and
+6.0 dB.
[OFF]
The test tone is not emitted from the
speakers.
[ON] The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.