Sony DAV-DZ7T, Руководство по эксплуатации

Страница: 28 / 112

28
GB
B
a
si
c
Op
er
a
ti
o
ns
Selecting the connected
component
You can use a VCR or other components
connected to the SAT/CABLE or TV jacks on
the rear panel. Refer to the operating instructions
supplied with the components for further
information.
Press FU/– repeatedly until “SAT/
CABLE” or “TV” appears in the front panel
display.
Each time you press FU/–, the mode
of the system changes in the following sequence.
DVD
t
TUNER FM
t
TUNER AM
t
SAT/CABLE t TV t AUDIO t …
Note
• When you use both the SAT/CABLE (AUDIO IN)
jacks (analog connection) and SAT/CABLE
(COAXIAL or OPTICAL DIGITAL IN) jack (digital
connection) at the same time, the digital connection
takes priority.
Changing the input level of
the sound from connected
components
Distortion may occur when listening to a
component connected to the SAT/CABLE or
TV jacks on the rear panel or to the AUDIO IN
jack on the front panel. This is not a malfunction
and will depend on the component connected.
To prevent this, you can change the input level
from the sound of the other components.
1
Press FU/– repeatedly until
“SAT/CABLE,” “TV,” or “AUDIO”
appears in the front panel display.
2
Press SYSTEM MENU.
3
Press X / x repeatedly until
“ATTENUATE” appears in the front
panel display, then press
or
c
.
4
Press X / x to select a setting.
The default setting is underlined.
• “ATT ON”: attenuates the input level.
The output level is changed.
• “ATT OFF”: normal input level.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
Enjoying the Radio or
Other Components
SYSTEM
MENU
X/x/c ,
FUNCTION
+/–