masterpage:Left
specdef v20061206
filename[E:\SS2007\Models\DS2KD\2895968E11\2895968E11DAVDZ250M\gb11adv.fm]
model name [DAV-DZ250M]
[2-895-968-
E1
(1)]
76
GB
x
[LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
To adjust the volume of all the
speakers at one time
Turn the VOLUME control on the unit, or press
/– on the remote.
x
[TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
Adjusting the speaker level by
using the test tone
1
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
2
Press
X
/
x
to select
[SETUP],
then press
.
The options for [SETUP] appear.
3
Press
X
/
x
to select [CUSTOM], then
press .
The Setup Display appears.
4
Press
X
/
x
repeatedly to select
[SPEAKER SETUP], then press
or
c
.
5
Press
X
/
x
repeatedly to select [TEST
TONE], then press
or
c
.
6
Press
X
/
x
repeatedly to select [ON],
then press
.
You will hear the test tone from each
speaker in sequence.
7
From your listening position, adjust the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using
C
/
X
/
x
/
c
.
The test tone is emitted from only the
speaker which you are adjusting.
8
Press
when you have finished
making adjustments.
9
Press
X
/
x
repeatedly to select [TEST
TONE], then press
.
10
Press
X
/
x
repeatedly to select [OFF],
then press
.
Note
• The test tone signals are not output from the HDMI
OUT jack.
[SUBWOOFER]
0.0 dB
Set this between –6.0 dB and
+6.0 dB.
[L/R]
0.0 dB
(appears when you
set [SURROUND]
to [YES] in the
[CONNECTION]
setting.)
Set this between –6.0 dB and
+6.0 dB.
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
