Sony DAR-X1R, Руководство по эксплуатации

Страница: 57 / 623

G
U
ID
E
Pl
us
+ (av
a
ilab
le
on
ly
i
n
ar
eas
w
ith
G
U
ID
E Pl
us
+ s
e
rv
ic
e)
GB
57
If you are having trouble displaying the television
programme list, please check the following:
• Your postal code must be set correctly (page 27).
• The clock must be set correctly. If the clock is
not set, set it manually (page 116).
• This recorder downloads the GUIDE Plus+ data
several times a day when the recorder is turned
off (standby mode). Turn off the recorder when
you are not using it (for example, at night). After
initial setup (page 27), it may take up to 24 hours
for your recorder to start receiving programme
listings. It may take up to one day to receive all
seven days of TV programme listings.
• Check the following if the programme guide data
has not been received after waiting for a day:
– “Easy Setup” (page 27) is finished.
– The host channel is not disabled (see
“Disabling programme positions” on page 63).
– The timer is not set.
If the programme guide data still cannot be
received after checking the above, search for the
host channel at the following website and set the
host channel manually (page 62):
www.europe.guideplus.com
• If you made connection “B: Connecting a set top
box receiver using a SCART cord only”
(page 33) and did not connect an aerial cable
from your set top box receiver to the recorder, do
the following:
– Turn on your set top box receiver.
– Connect the set top box controller.
– Follow the steps in “Changing the GUIDE
Plus+ host channel” (page 62). Be sure to set
your set top box receiver (tuner) as the source.
b
Notes
• Your set top box receiver’s programme position may
suddenly change even if the recorder is turned off. This
is because the set top box controller has changed the
programme position to receive the GUIDE Plus+ data.
• When you set “Factory Setup” to “All,” the recorder is
initialized. When you change the following settings, the
GUIDE Plus+ system is reset:
– Country/region setting in “Easy Setup”
– “Country” of “Setup” - “Basic Setup” in the Menu
Bar
– Postal code setting in “Easy Setup”
– “Postal Code” of “Setup” - “Basic Setup” in the Menu
Bar
Note that the GUIDE Plus+ system is also reset when
you make changes to the host channel settings or if you
set “Factory Setup” to “Basic.”
Watching TV using the
GUIDE Plus+ System
1
Press TV GUIDE.
The GUIDE Plus+ system “Home Screen”
appears.
2
Select a programme using < / M / m / , ,
and press .
The GUIDE Plus+ system disappears and the
programme position changes to the selected
programme.
Troubleshooting guide
< / M / m / , ,
DAYS –
TV GUIDE
Colour
buttons
DAYS +
PAGE
/
, continued