Digital Still Camera
DSC-W810
Eye-Fi
You can use the upload function by using a commercially available Eye-Fi card.
The menu screen of the auto upload function is displayed only when the Eye-Fi card is inserted in the memory card slot
of the camera.
1. MENU -
(Settings) -
(Main Settings) - [Eye-Fi] - desired mode -
On(Default setting):
Enables the upload function.
The Eye-Fi mode display icon on the screen will change depending on the communication mode of the Eye-Fi card.
: Eye-Fi card is in standby mode. There is no image to be sent.
: Eye-Fi card is in upload standby mode.
: Eye-Fi card is in connecting mode.
: Eye-Fi card is uploading images.
: An error has occurred.
Off:
Disables the upload function.
Note
Eye-Fi cards are sold in the some countries or regions.
For more information on the Eye-Fi card, contact the manufacturer or seller of Eye-Fi cards directly.
Eye-Fi cards are permitted only in the countries and regions in which they were purchased. You may be held liable
due to local restrictions.
The Eye-Fi card has a wireless LAN function. Do not insert the Eye-Fi card where wireless LAN is prohibited, such as
while aboard an airplane. If the Eye-Fi card is inserted, set [Eye-Fi] to [Off]. When the uploading function of the Eye-
Fi card is set to [Off],
is displayed on the screen.
Transferring image data using the Eye-Fi card
1. Set the wireless LAN access point settings or the transferring direction settings of the Eye-Fi card.
For details, refer to the operating instructions supplied with the Eye-Fi card.
2. After the settings are finished, insert the Eye-Fi card into the camera, and shoot the images.
The recorded images are automatically transferred via wireless LAN to a computer, etc.
Note
When uploading image data, [Power Save] is not available.
If the
(error) icon is displayed, eject and re-insert the Eye-Fi card, or turn the power of the camera off and on
again. If the
(error) icon is still displayed, the Eye-Fi card may be corrupted. For details, contact Eye-Fi, Inc.
Help Guide
How to use
148
