103
Tr
oub
le
s
hoot
in
g
Computers
You cannot display a print
(DPOF) mark.
• You cannot display print (DPOF) marks on
movies and Clip Motion images.
—
You cannot cut a movie.
• The movie (MPEG Movie) is not long enough to
cut.
• Protected movie (MPEG Movie), Clip Motion,
Multi Burst files and still images cannot be cut.
—
—
Symptom
Cause
Solution
Symptom
Cause
Solution
You do not know if the OS
of your computer is
compatible.
—
p
Check “Recommended computer environment” (pages 85 and
95).
You cannot install the
USB driver.
—
p
In Windows 2000, log on as Administrator (authorized
Administrators) (page 85).
Your computer does not
recognize your camera.
• The camera is turned off.
• The battery level is low.
• You are not using the supplied USB cable.
• The USB cable is not connected firmly.
• [USB Connect] is set to [PTP] in the SET UP
settings.
• The USB connectors on your computer are
connected to other equipment besides the
keyboard, the mouse, and your camera.
• The camera is not connected directly to your
computer.
• The USB driver is not installed.
• Your computer does not properly recognize the
device because you connected the camera and
your computer with the USB cable before you
installed the “USB Driver” from the supplied
CD-ROM.
p
Turn on the camera (page 14).
p
Use the AC Adaptor (page 13).
p
Use the supplied USB cable (pages 89 and 95).
p
Disconnect the USB cable, and connect it again firmly. Make
sure that “USB Mode” is displayed on the screen (pages 89 and
95).
p
Set it to [Normal] (page 117).
p
Disconnect all equipment other than your camera from the USB
connectors.
p
Connect the camera directly to your computer without passing
through a USB hub or other device.
p
Install the USB driver (pages 86 and 95).
p
Delete the erroneously recognized device from your computer,
then install the USB driver (pages 91 and 86).
Содержание CYBER-SHOT DSC-V1
Страница 131: ......