Sony Cyber-shot DSC-HX99, Руководство пользователя

Страница: 119 / 511

Help Guide
Digital Still Camera
DSC-HX99
Manual Exposure
You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture.
Hint
By assigning [AEL hold] or [AEL toggle] to a desired key using [ Custom Key] or [ Custom Key] and turning the control
ring or control wheel while pressing that key, you can change the shutter speed and aperture (F-value) combination without
changing the set exposure value. (Manual shift)
Note
The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO].
When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes.
The SteadyShot warning indicator does not appear in manual exposure mode.
The brightness of the image on the screen may differ from the actual image being shot.
4-745-578-11(1) Copyright 2018 Sony Corporation
Set the mode dial to M (Manual Exposure).
1
Press the down side of the control wheel to select the shutter speed or aperture value, then turn the control
wheel to select a value.
You can also set [ISO] to [ISO AUTO] in manual exposure mode. The ISO value automatically changes to
achieve the appropriate exposure using the aperture value and shutter speed you have set.
When [ISO] is set to [ISO AUTO], the ISO value indicator will blink if the value you have set is not suitable for
appropriate exposure. If this happens, change the shutter speed or aperture value.
When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual)* to check the exposure value.
: Images become brighter.
Toward -: Images become darker.
0: Appropriate exposure analyzed by the product.
2
Indicates under/over for appropriate exposure. *
It is displayed using a numerical value on the monitor and with a metering indicator on the viewfinder.
Adjust the focus and shoot the subject.
3
119