DSC-HX7/HX7V_L2
3-1E
3. ASSEMBLY
Assembly-1:
Precaution During SP Holder (930) Installation.
Route the speaker harness as shown below.
Ribs
SP Holder (930)
Speaker
Harness
Assembly-3:
Attaching Method of LCD Cushion (930),
LCD Window (930).
Set the LCD cushion (930).
Put the LCD.
Remove the LCD.
Remove the released paper of the LCD cushion (930).
LCD cushion (930)
Cabinet (Rear) Assy (930)
Adhesive side
LCD
LCD
Released Paper of
the LCD Cushion (930)
Tab
Install the LCD again.
LCD
LCD
LCD Window (930)
Adhesive part of
the LCD Cushion (930)
Fit the LCD window (930) in to the flame of
cabinet (rear) assy and attach to the LCD cushion (930).
Blow the air before attaching.
Be sure to keep away from dust.
Assembly-2:
Precaution During of Cabinet (Upper)
Assy (930) installation.
Adjust the position of the zoom switch and the zoom lever.
After assembling, check whether the zoom lever turn to
the T/W both sides.
Zoom switch
RL-108 Board
Zoom lever
Zoom lever
Cabinet (Upper) Assy (930)
