DSC-HX7/HX7V_L2
1-7
1-6. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD
1-7. CAM TUBE BLOCK REPLACING METHOD
2
Peel off release papers of Barrier Tapes.
3
Install Ornamental Ring A and press it lightly.
Installation
5
Remove Barrier Assy by disengaging four claws.
Removal
1
Turn on the power switch and extend the lens.
2
Detach the battery.
4
Remove while turning the Ornamental Ring A right and left.
3
Pour a solvent such as alcohol from four places
A
to the tweezers or a needle shown below into a gap of Ornamental Ring A.
Barrier Tapes
Barrier Tapes
Ornamental Ring A
1
With four claws fitted in position, install the Barrier Assy.
Hole
Tweezers
Claws
Claws
Barrier Assy
A
A
Ornamental Ring A
Solvent
Barrier Assy
Claws
Claws
Barrier
Lever
Removal
1
Remove the four soldering, and disconnect the flexible board form the connector.
2
Remove the flexible board from the three tabs with peeling off the adhesive tapes.
3
Remove the screw, and remove the zoom motor.
Flexible
Board
Flexible
Board
Solders
Connector
Flexible
Board
Adhesive Tapes
Adhesive Tapes
Tabs
Screw
Zoom Motor
