78
–
If you perform any invalid operation, the
indicator flashes, and the “Night shot”
indicator lights for about five seconds.
•
While using the NightShot function, you cannot
use the following functions:
–
AE LOCK
–
Shooting with hologram AF
–
Shooting with the flash
–
Selecting the color reproduction mode
•
While the camera is in Multi Burst mode, the
NightShot function cannot be used.
•
When [Pop-up Flash] is set to [Manual] in the
SET UP settings, pop up the flash emitter using
the
OPEN (FLASH) switch.
•
When attaching the supplied lens hood, infrared
ray may be blocked.
•
Do not use the NightShot function in bright
places (e.g. outdoors in the daytime). This may
cause your camera to malfunction.
NightFraming
The NightFraming function enables you to
check a subject even at night and then
record with natural colors using the flash.
a
Set the mode dial to
or P.
b
Press and hold NIGHTSHOT/
NIGHTFRAMING and select
(Night framing) with the
command dial.
The flash emitter pops up and the
and “Night framing” indicators light
for about five seconds.
c
Press and hold the shutter
button halfway down.
The focus is automatically adjusted.
d
Press the shutter button fully
down.
The shutter sounds, the flash strobes
and the image is recorded.
To cancel the NightFraming function
In Step
2
, select [Off].
•
While using the NightFraming function:
–
The white balance is set to Auto.
–
The metering mode is set to multi-pattern
metering.
–
The AF range finder frame is not displayed.
The centrally-located subject has priority to
focus on.
–
The AE lock cannot be used.
–
If you perform any invalid operation while
using the NightFraming function, the
indicator flashes and the “Night framing”
indicator lights for about five seconds.
•
When [Pop-up Flash] is set to [Manual] in the
SET UP settings, pop up the flash emitter using
the
OPEN (FLASH) switch.
•
When attaching the supplied lens hood, flash
light and infrared ray may be blocked.
•
When you press the shutter button halfway
down, you will hear a sound, but this is not the
sound of the shutter releasing. The image is not
recorded yet.
•
When [Hologram AF] is set to [Off], you may
not get a clear focus. Setting [Hologram AF] to
[Auto] is recommended (page 35).
•
When using the following functions, you
cannot use the NightFraming function.
–
Manual focus
–
Exposure Bracket
–
Burst
–
Multi Burst
8M
4
101
"Night framing"
80
min
MAF
