36
Inserting the date and time on a still image
,
Set the mode dial to SET UP.
The SET UP screen appears.
•
The date and time cannot be inserted in Multi
Burst mode.
•
When images are shot with the date and time
inserted, the date and time cannot be removed
later.
•
When shooting images with the date and time
inserted, the actual date and time are not
displayed on the screen, and
is displayed
on the screen instead. The actual date and time
are indicated in red on the lower-right corner
when the image is played back.
,
Select
(Camera 1) by
moving the multi-selector to
v
,
then move to
B
.
Select [Date/Time] by moving
the multi-selector to
v
/
V
, then
move to
B
.
,
Select the date and time setting
by moving the multi-selector to
v
/
V
, then press the center.
Day&Time:
Inserts the date and the time of
shooting into the image
Date:
Inserts the year, the month and the
date of shooting into the image
Off:
Does not insert date/time data into the
image
After the setting has been completed, set the
mode dial to
to shoot your image.
•
You can shoot even when the mode dial is set to
P, S, A, M or SCN.
•
When you chose [Date], the date will be
inserted in the order set in “Setting the date and
time” (page 19).
•
This setting is maintained even when the power
is turned off.
1
SELECT
Camera 1
AF Mode:
Digital Zoom:
Date/Time:
Red Eye Reduction:
Hologram AF:
Monitor
Precision
Off
Off
Auto Review:
Off
Auto
2
Day&Time
Date
Off
Camera 1
AF Mode:
Digital Zoom:
Date/Time:
Red Eye Reduction:
Hologram AF:
Auto Review:
1
3
Camera 1
AF Mode:
Digital Zoom:
Date/Time:
Red Eye Reduction:
Hologram AF:
Monitor
Precision
Date
Off
Auto Review:
Off
Auto
PAGE SELECT
