Sony Cyber-shot DSC-F828, Руководство по обслуживанию

Страница: 138 / 287

131
Tr
ou
bl
esho
o
ting
• The battery level is low or zero. Charge the battery pack (page 14). Depending on the conditions of use or the type
of battery pack, the indicator may flash even though there are still 5 to 10 minutes of remaining battery time left.
Folder error • A folder with the same first three digits number already exists on the recording medium. (For example: 123MSDCF
and 123ABCDE) Select other folders, or create a new folder.
Cannot create more folders
• The folder whose first three digits of the name is “999” exists on the recording medium. You cannot create any more
folders.
Cannot record • You attempted to select the folder that is available only for viewing with your camera. Select other folders (page 51).
• The amount of light is not sufficient, or camera shake may occur because a slower shutter speed is set. Use the flash,
or mount the camera on a tripod to steady the camera.
“Night shot” • An operation that is not valid while NIGHTSHOT is set was attempted.
“Night framing” • An operation that is not valid while NIGHTFRAMING is set is attempted.
Manual focus is invalid
• The FOCUS switch is set to MANUAL when the mode dial is set to .
The flash is not open • Pop the flash up using the OPEN (FLASH) switch (page 69).
640 (Fine) is not available
• A recording medium that does not correspond to the [640 (Fine)] size movie is inserted (page 100).
Busy • When using the Microdrive, the data writing process was not performed due to a drop in data transmission rate.
Buffer over
• When using the Microdrive, the data writing process was not performed due to a drop in data transmission rate. (This
message is indicated after the “Busy” message appeared.)
Read error • The movies stored on the Microdrive cannot be played back due to an internal temperature problem or vibration.
• The file is corrupted.
File error
• An error occurred while playing back the image.
Image size over • You are playing back an image of a size that cannot be played back on your camera.
No file in this folder
• No images have been recorded in this folder.
Cannot divide • The movie is not long enough to be divided.
• The file is not a movie.
Invalid operation
• You are playing back a file that was created on equipment other than your camera.
Enable pritner to connect • [USB Connect] is set to [PictBridge], however the camera is connected to a non-PictBridge-compliant device.
Check the device.
Connect to device
• You tried to print images before the printer connection was established.
Message Meaning/ Corrective Action