105
Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
GB
This may damage your image data and is
displayed.
is indicated on a thumbnail.
The image data base file may be damaged.
Check the data base file by touching
(MENU)
[Setup]
[ (Media Settings)]
[Repair Img. DB F.]
the recording
medium. If it still appears, delete the image
with (p. 51).
No sound or only a quiet sound is heard
during playback.
Turn up the volume (p. 31).
When you record sound with [Micref Level]
(p. 86) set to [Low], the recorded sound may
be difficult to hear.
Sounds cannot be recorded while shooting
with [Smth Slw REC] or [Golf Shot].
Left and right sound will be heard
unbalanced when playing back movies on
computers or other devices.
Change the sound conversion type (downmix
type) when playing back on 2ch stereo devices.
Refer to the instruction manual supplied with
your playback device for details.
Change the sound to 2ch when creating a disc
using the supplied software “PMB.”
This happens when sound recorded in 5.1ch
surround is converted to 2ch (normal stereo
sound) by a computer or other device. This is
not a malfunction.
Record sound with [Audio Mode] set to [2ch
Stereo] (p. 85).
The demonstration movies cannot be
played.
Select the internal recording media for the
recording media, and the high definition
image quality (HD).
The demonstration movie was deleted.
A movie is played back automatically.
Movies play automatically as a demonstration
movie when the filmed movie fulfills a certain
condition on your camcorder (p. 97). This is
not a malfunction.
Playing back images stored on
memory card on other devices
Images cannot be played back or the
memory card is not recognized.
The playback device does not support playing
back memory cards (p. 4).
Editing movies/photos on your
camcorder
Unable to edit.
Unable to edit because of the condition of the
image.
A movie cannot be divided.
A movie that is too short cannot be divided.
A protected movie cannot be divided.
A photo cannot be captured from a
movie.
The recording media where you want to save
photos is full.
Playback on the TV
Neither image nor sound is played on the
connected TV.
When you are using the component A/V
cable, set [Component] according to the
requirements of the connected device (p. 93).
When you are using the component video
plug, make sure the red and white plugs of the
A/V connecting cable are connected (p. 33).
