A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory Menu
48
Suffix
Select a suffix to be added to the file name sent to FTP
server.
None:
The name of the sent file will be the image file
name.
Date & time:
The date & time suffix is added to the
image file name.
The date & time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits) and second (2 digits), and
consecutive number (2 digits), thus 14-digit number
is added to the file name.
Sequence number:
A consecutive number of 10 digits
between 0000000001 and 4294967295 and two fixed
digits 00 is added to the image file name.
Sequence number clear
Click
Clear
and the suffix of the sequence number
returns to 1.
Interval
Type the interval at which you want to send images to
the FTP server periodically. You can set the hour (H),
minutes (M) and seconds (S) between 1 second and 24
hours (one day).
Note
The actual interval may be longer than the set value,
depending on the image size, image quality setting, bit
rate and the network environments.
Effective period
Set the period when the periodical sending is effective.
Always:
The periodical sending is always effective.
Schedule:
You can specify the period when the
periodical sending is effective in the schedule setting
in the other section.
Click
Schedule
and the menu for the effective period
is displayed. (“Setting the Schedule — Schedule
Menu” on page 55)
OK/Cancel
See “Buttons common to every menu” on page 28.
Recording Images in
Memory
— Image memory Menu
When you click
Image memory
on the Administrator
menu, the Image memory menu appears.
By using the image memory function, you can record the
image file, which has been shot being linked with the
external sensor input or with the built-in motion
detection function, to the built-in memory (about 8 MB)
of the camera. The image file can also be recorded
periodically.
The recorded image and can be found or downloaded to
the computer using the FTP server function. (See
“Downloading Images from the Camera — FTP server
Menu” on page 52.)
Image memory menu is composed of three tabs
Common
,
Alarm recording
and
Periodical recording
.
Notes
• The image files recorded in the built-in memory will
be erased when the power of the camera is turned off.
• The frame rate and operability on the main viewer
may decrease during image storage in the built-in
memory.
Common Tab — Setting the Image
memory Function
Image memory
Set whether you use the Image memory function or not.
When you select
On
, the Common setting options are
displayed in the below. If you do not use it, select
Off
and click
OK
.
Free space
Shows the current free space of the builtin memory.
