Sony CPD-110GS, Руководство по эксплуатации

Страница: 6 / 32

6
Setup
Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen’s surface (1)
• This instruction manual (1)
Step 1: Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
x
Connecting to an IBM PC/AT or compatible
computer
x
Connecting to a Macintosh or compatible
computer
Step 2: Connect the power cord
With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
Step 3: Turn on the monitor and
computer
First turn on the monitor, then turn on the computer.
The installation of your monitor is complete.
If necessary, use the monitor’s controls to adjust the picture.
to video output
IBM PC/AT or
compatible computer
You will need a Macintosh adapter (not supplied).
Macintosh or
compatible computer to video
output
Macintosh adapter
(not supplied)
to AC IN
to a power outlet
power cord (supplied)