COM-1.US.2-668-393-12(2)
Getting Started
27
27
Setting the Connecting Method for
Wireless LAN in Infrastructure Mode
If you usually use the same wireless network, you can set the unit to connect
automatically to specific pre-registered wireless networks.
If you often move between different wireless networks, you select a wireless
network each time from a list of available wireless networks.
On the Home menu, press
/
to select “Tools,” and then
press the center button.
Press
/
to select “Settings,” and then press the center
button.
Press
/
to select “Network Settings,” and then press the
center button.
Press
/
to select “Auto Connect,” and then press the center
button.
Press
/
to select “ON” or “OFF,” and then press the center
button.
If you set to “ON”
When you turn on the wireless LAN, the unit tries to connect to the pre-
registered wireless networks until a successful connection is made. Before
using, register the wireless network (
page 28).
If you set to “OFF”
When you turn on the wireless LAN, the available wireless networks are
listed in the Connection Dialog. Select the wireless network from the list
each time.
Continued
Index
Table of
Contents
