Dis
p
la
y
37
GB
Other operations
Notes
• You cannot activate the Play Timer and Rec Timer at
the same time.
• If you use the Rec Timer and the Sleep Timer at the
same time, the setting with the earlier end time has
priority.
• The system turns on 15 seconds before the preset
time. Do not operate the system from the time the
system turns on until the play starts.
• If the system is on 15 seconds before the preset time,
the Rec Timer will not be activated.
• The volume is reduced to minimum during
recording.
• Note that if the Rec Timer is set at the same time as
the Play Timer sound source is set to tape, the Rec
Timer sound may be recorded onto the tape.
The clock display can be turned off to minimize
the amount of power consumed during standby
(Power Saving Mode).
Press DISPLAY repeatedly while the
system is off until the clock display
disappears.
To cancel Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
as follows:
Clock display*
y
No display (Power Saving
Mode)
* The clock is displayed only if you set the clock.
Tips
• The timer continues to operate in Power Saving
Mode.
•
?/1
indicator lights up even in Power Saving Mode.
Press DIMMER repeatedly.
Each time you press the button, the setting
changes cyclically as follows:
DIMMER OFF
t
DIMMER 1
t
DIMMER 2*
* DIMMER 2 is the darkest.
To
Do this
Check the setting
1
Press CLOCK/TIMER
SELECT.
2
Press
.
or
>
repeatedly until “REC SEL”
appears, then press ENTER.
Change the setting
Start over from step 1.
Cancel the timer
1
Press CLOCK/TIMER
SELECT.
2
Press
.
or
>
repeatedly until “TIMER
OFF” appears, then press
ENTER.
Display
Turning off the display
— Power Saving Mode
Adjusting the brightness
of the indicators
Содержание CMT-SX2D
Страница 58: ...58GB ...
Страница 59: ...Additional Information 59GB ...
Страница 60: ...Sony Corporation Printed in China ...