Sony CMT-SX2D, Руководство по эксплуатации

Страница: 19 / 60

D
isc
– P
la
y
19
GB
You can make a program of up to 12 steps.
You can synchro record the programmed tracks
onto a cassette tape (page 32).
The program operation can only be set using the
TV screen.
1
Press DVD (or FU or –
repeatedly) to switch the function to
DVD.
2
Press PLAY MODE repeatedly in stop
mode until the Program Display
appears on the TV screen.
3
Press M / m / < / , repeatedly to select
the desired step number.
4
Press the number buttons to select the
track you want to program.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
5
To program other tracks, repeat steps 3
and 4.
6
Press M / m / < / , repeatedly to select
“Play Program,” then press H (or DVD
NX on the unit).
Program Play starts.
Other operations
Notes
• You cannot perform Program Play with DVDs and
VIDEO CDs with PBC function.
• Program Play is canceled when:
– you turn off the system.
– you open the disc tray.
– you switch to other functions except DVD.
Tip
The program you made remains after Program Play
finishes. To play the same program again, press
H
(or
DVD
NX
on the unit).
Creating your own
program
— Program Play
7
8
9
10
11
12
Tr a ck
All Cle a r Pl a y Progr a m
Progr a m
1
2
3
4
5
6
7
8
9
10
11
12
Tr a ck
All Cle a r Pl a y Progr a m
Progr a m
1 3
2
3
4
5
6
To Do this
Cancel Program Play Press PLAY MODE
repeatedly in stop mode
until “Continue” appears.
Clear a programmed
step Press
M
/
m
/
<
/
,
repeatedly to select a step
number, then press CLEAR
in stop mode.
Clear all the
programmed steps Press M / m / < / ,
repeatedly to select “All
Clear,” then press ENTER.