masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-SE7\CMT-
SE7_GBCT\DTP\4248325112\424832511CMTSE7HK\GB10TUN-CEK.fm]
64
GB
model name [CMT-SE7]
[4-248-325-11(2)]
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 62).
1
Press TUNER/BAND repeatedly (or
move TUNER stick on the unit to FM or
AM) to select “FM” or “AM”.
2
Press TUNING MODE repeatedly until
“PRESET” appears.
3
Press or – repeatedly to
select the desired preset station.
* The station name appears only if you have
labelled the station (see “Labelling the preset
stations” on page 65).
To select the desired preset
number using the number buttons
Press number buttons instead of performing
step 3. To enter preset number 10 or higher,
press >10 and the corresponding number
buttons. To enter 0, press 10/0.
Tip
After step 1, you can also use /– to select a
preset number.
Listening to a non-preset
radio station
— Manual Tuning
1
Press TUNER/BAND repeatedly (or
move TUNER stick on the unit to FM or
AM) to select “FM” or “AM”.
2
Press TUNING MODE repeatedly until
both “AUTO” and “PRESET”
disappear.
3
Press or – on the remote
repeatedly to tune in the desired
station.
Tips
• When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” appears.
There will be no stereo effect, but the reception will
improve.
• Press TUNING MODE repeatedly until “AUTO”
appears in step 2 above, then press + or – on the
remote. The frequency indication changes and
scanning stops when the system tunes in a station
(Automatic Tuning).
• To record the radio programs, use manual recording
(page 42).
• If reception is bad, do the following.
1 Switch the system function to DVD, then press
?/1
to turn off the system.
2 While pushing the SA-CD/DVD stick towards
x
,
press
?/1
on the unit. (“DVD POWER OFF”
appears.)
• To improve the reception, adjust the supplied
antennas or connect an external antenna.
• To operate the unit with the lid closed, perform step
2 in “Listening to a non-preset radio station” to
display “Manual”.
• You can also move TUNER stick t or – to
tune in desired stations.
Listening to the radio
Frequency
*
Preset number
