Sony CMT-M333NT Скачать руководство пользователя

Страница: 38 / 68

Listening to non-preset radio
station

— Manual Tuning

Press TUNER BAND repeatedly to
select “FM” or “AM”.

Press TUNING MODE repeatedly until
“AUTO” and “PRESET” disappear from
the display.

Press + or – repeatedly to tune in the
desired station.

Tips

• To improve broadcast reception, adjust the supplied

aerials, or connect a commercially available external
aerial.

• When an FM stereo program has static noise, press

FM MODE repeatedly until “MONO” appears.
There will be no stereo effect, but the reception will
improve.

• Press TUNING MODE repeatedly until “AUTO”

appears in step 2 above, then press + or –. The
frequency indication changes and scanning stops
when the system tunes in a station (Automatic
Tuning).

• To record the radio programs, use manual recording

(pages 17 a nd 41).

You can label each preset station with up to
12 characters (Station Name).

Tune in the station you want to label
(see “Listening to the radio” on
page 37).

Press NAME EDIT/SELECT.

The cursor starts flashing.

Perform steps 3 to 6 of “Labeling an
MD/group/track” (page 25).

To cancel labeling

Press MENU/NO.

To erase the station name

Tune in the preset station you want to erase
the station name.

Press NAME EDIT/SELECT.

Press CLEAR repeatedly to erase the name.

Press ENTER/YES.

Labeling the preset
stations

— Station Name

PRESET

Cursor

Содержание CMT-M333NT





































































Результаты поиска

Содержание CMT-M333NT

Отзывы:

Похожие инструкции для CMT-M333NT

Бренды по названию

Популярные бренды

Sony CMT-M333NT, Руководство по эксплуатации

Результаты поиска

Содержание CMT-M333NT

Отзывы:

Похожие инструкции для CMT-M333NT

Бренды по названию

Популярные бренды