Sony CMT-M333NT, Руководство по эксплуатации

Страница: 15 / 68

MD
–
R
e
c
o
rd
ing
15
GB
After recording
Press Z MD on the unit to remove the MD
or press ?/1 (power) to turn off the system.
“TOC writing” or “STANDBY” starts flashing.
The TOC is updated and recording is completed.
Before pulling out the mains lead
MD recording is completed when the MD Table
of Contents (TOC) is updated. The TOC is
updated when you eject the MD or press
?/1 to
turn off the system. Do not pull out the mains
lead before updating the TOC or while updating
the TOC (while “TOC” lights up or flashes) to
ensure a complete recording.
Protecting a recorded MD
• To protect a recorded MD, slide the tab on the
side of the MD to open the slot. In this
position, the MD cannot be recorded. To
record on the MD, slide the tab to close the
slot.
• If the MD is record protected, “C11” and
“Protected” appear alternately and the MD
cannot be recorded. Remove the MD, then
slide the record protection tab to the closed
position.
You can record a whole CD on an MD. You can
select the recording time by switching the
recording mode.
In addition to recording at normal speed, you
can also record at high speed (approximately 4
×
normal speed).
Use buttons on the unit for the operation.
1
Load a recordable MD.
2
Load a CD you want to record.
3
Press REC MODE repeatedly to select
the recording mode.
Select the desired recording time.
4
Press SYNCHRO MODE repeatedly
until “CD
t MD SYNC” appears.
To record using High-Speed CD-MD
Synchro Recording, press the button until
“HISPEED SYNC” appears.
5
Press ENTER/START.
“Press START” flashes.
The MD deck stands by for recording and
the CD player pauses for play.
6
Press ENTER/START while “Press
START” flashes.
Recording starts.
When the recording is completed, the CD
player and the MD deck stop automatically.
Tab
Slide the tab
Recording a CD on an MD
— CD-MD Synchro Recording/High-
Speed CD-MD Synchro Recording
Recording time Select
(Recording mode)
Standard no indication (stereo)
Double LP2 (LP2 stereo)
Quadruple LP4 (LP4 stereo)
Double
(change the stereo
signal to monaural) MONO (monaural)
L-SYNC
REC SYNC
NORM
MD CD
continued