54
GB
Optional components
There is no sound.
• Refer to General item “There is no sound.”
(page 50) and check the condition of the system.
• Connect the component properly (page 47) while
checking if:
– The cords are connected properly.
– The cord plugs are firmly inserted all the way.
• Turn on the connected component.
• Refer to the operating instructions supplied with
the connected component and start playing.
• Press FUNCTION repeatedly until “MD” or
“VIDEO” appears (page 48).
The sound is distorted.
• Set the volume of the connected component
lower.
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
Use buttons on the unit for the operation.
1
Disconnect the power cord.
2
Reconnect the power cord.
3
Press
?/1
to turn on the system.
4
Press
x
, DIRECTION and
?/1
at the same
time.
The system is reset to the factory settings. You
should set the settings you made, such as the
preset stations, clock, and timer.
To return the DVD setup to the
default settings
*
, perform reset
as follows:
1
Press DVD SETUP in stop mode.
2
Press
M/m
repeatedly to select “SET UP”,
then press ENTER.
3
Press
M/m
repeatedly to select “RESET”,
then press ENTER.
4
Press
M/m
repeatedly to select “YES”, then
press ENTER.
It takes a few seconds to complete. Do not
press
?/1
when resetting the system.
* Except for Parental Control settings
Содержание CMT-HPX11D
Страница 1: ... 2004 Sony Corporation 2 055 021 11 1 Micro Hi Fi Component System Operating Instructions CMT HPX11D ...
Страница 67: ......
Страница 68: ...Sony Corporation Printed in China ...