16
GB
Labeling the preset
stations
— Station Name
You can label each preset station with up to
10 symbols or characters (Station Name).
1
Tune the preset station you want to
label (see “Listening to the radio” on
page 15).
2
Follow the same procedures as from
steps 2 to 6 of “Labeling a CD” on
page 11.
To cancel labeling
Press MENU/NO on the remote.
To erase the name
1
Tune the station.
2
Press NAME EDIT/SELECT on the remote.
3
Press CLEAR on the remote repeatedly to
erase the name.
4
Press ENTER/YES on the remote.
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data System?
Radio Data System (RDS)* is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal.
Note
RDS may not work properly if the station you have
tuned in is not transmitting the RDS signal properly
or if the signal is weak.
* Not all FM stations provide RDS service, nor do
they all provide the same type of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the
display.
To check the RDS information
Each time you press DISPLAY, the display
changes cyclically as follows:
Station name**
t
Frequency
t
Clock
display
t
Volume
** If the RDS broadcast is not properly received, the
station name may not appear.
