background image

Description

The CXP854P60 are a highly integrated micro-

computers composed of a 8-bit CPU, PROM, RAM,

and I/O ports. These chips feature many other high-

performance circuits in a single-chip CMOS design,

including an A/D converter, serial interface,

timer/counter, time-base timer, vector interrupt, on-

screen display function, I

2

C bus interface, PWM

generator, remote control receiver, HSYNC counter,

and watchdog timer.

Also, the CXP854P60 provides power-on reset

and sleep functions. The designers have ensured

low power consumption for these powerful micro-

computers.

Incorporating a one-time PROM, the CXP854P60

has an equivalent function to the CXP85460 and

character ROM for OSD can be written. Therefore, it

is suitable for evaluation in system development

and for the production of small amounts.

Features

• Instruction set which supports a wide array of data types-213 types of instructions which include 16-bit

calculations, multiplication and division arithmetic, and boolean operations.

• Minimum instruction cycle

0.5µs/8MHz

• On-chip PROM

60K bytes (For program)

10K bytes (For OSD)

• On-chip RAM

960 bytes

• On-screen display function

12 

×

18 dots, 384 types, 12lines of 32 characters

Black frame output, half blanking, shadow, background color on full screen

Double scanning mode supported includes jitter elimination circuit

• I

2

C bus interface

• 14-bit PWM output, 8-bit PWM output (8 channels)

• Remote control receiver circuit

• 8-bit A/D converter (4 channels, 20µs conversion time/4MHz, 8MHz)

• HSYNC counter (2channels)

• Watchdog timer

• 8-bit synchronized serial I/O

• 8-bit timer, 8-bit timer/counter, 19-bit time-base timer

• General purpose input/output 32-line I/O (bit-selectable input/output), also 6-line input, 10-line output (internal

8-line Nch-O/D)

• Interrupts

13 factors, 13 vectors, multiple interrupt possible

• Standby mode

SLEEP

• Package

64-pin plastic SDIP/QFP

Purchase of Sony's I

2

C components conveys a license under the Philips I

2

C Patent Rights to use these components 

in an I

2

C system, provided that the system conforms to the I

2

C Standard Specifications as defined by Philips.

– 1 –

CXP854P60

E95109A16-PS

CMOS 8-bit Single-chip Microcomputer

Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.

64 pin SDIP (PIastic)

64 pin QFP (PIastic)

Structure

Silicon gate CMOS IC

Содержание CMOS CXP854P60






















Отзывы: