18
Locating a disc by name — LIST
You can select a disc from the list when a CD
changer with CD TEXT capability, or MD
changer is connected.
If you assign a name to a disc, the name appears
on the list.
1
During playback, press
(LIST).
The disc number or disc name appears.
2
Rotate the control dial until the desired disc
appears.
3
Press the select button to play the disc.
The display returns to normal play mode.
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
The following controls on the rotary commander
require a different operation from the unit.
•
ATT (attenuate) button
To attenuate the sound. To cancel, press again.
•
PRESET/DISC control
CD/MD
: The same as
(3)
/
(4)
(ALBUM –/+)
on the unit (push in and rotate).
Radio
: To receive stored stations (push in and
rotate)
•
VOL (volume) control
The same as the control dial on the unit (rotate).
•
SEEK/AMS control
The same as
(SEEK)
–/+ on the unit (rotate, or
rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1
While pushing the VOL control, press and
hold
(SOUND)
.
SOUND
DSPL
MODE
SOUND
DSPL
MODE
OFF
ATT
SOUND
SOURCE
DSPL
MODE
OFF
VOL
SEEK/AMS
PRESET/
DISC
To increase
To decrease
