13
CDX-R6550
2-348-439-21 (1)
H:\Data Disk\2348439211\234843921CDXR6550EUR\01GB02CD-EUR.fm
masterpage:Right
H:\Data Disk\2348439211\234843921CDXR6550EUR\01GB02CD-EUR.fm
masterpage:Right
With the card remote commander
In step 2, to select the character, press
M
or
m
.
Deleting the custom name
1
Select the unit that has stored the custom name
you want to delete, then press and hold
(LIST)
.
2
Press and hold
(DSPL)
.
The stored name will flash.
3
Press the /– button repeatedly to
select the name you want to delete.
4
Press and hold
(SEL)
.
The name is deleted. Repeat steps 3 and 4 to
delete other names.
5
Press and hold
(LIST)
.
The unit returns to normal play mode.
With the card remote commander
In step 3, to select the name, press
M
or
m
.
Locating a disc by name — list-up
You can select a disc from the list when
connecting a CD changer with the CUSTOM
FILE function or an MD changer.
If you assign a name to a disc, the name appears
on the list.
1
During playback, press
(LIST)
.
The disc number or disc name appears.
2
Press
(LIST)
repeatedly until the desired disc
appears.
After 5 seconds, the unit returns to normal
play mode.
3
Press
(SEEK)
+/– to play the disc.
With the card remote commander
In step 2, to select the disc, press
M
or
m
.
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
The following controls on the rotary commander
require a different operation from the unit.
•
PRESET/DISC control
To select preset stations; control CD, the same
as
(1)
/
(2)
–/+ on the unit (push in and rotate).
•
VOL control
The same as the /– button on the unit
(rotate).
•
SEEK/AMS control
The same as
(SEEK)
+/– on the unit (rotate, or
rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1
While pushing the VOL control, press and
hold
(SEL)
.
SEL
DSPL
MODE
SEL
DSPL
MODE
OFF
ATT
SEL
SOURCE
DSPL
MODE
OFF
VOL
SEEK/AMS
PRESET/DISC
To increase
To decrease
00GB+00COV-EUR.book Page 13 Monday, November 8, 2004 1:50 PM