Sony CDX-R5515X - Fm/am Compact Disc Player, Руководство по эксплуатации

Страница: 10 / 36

10
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 3, to adjust the selected item, press < , M , ,
or m .
Labeling a station/disc
When you receive a station, or play a disc in a
CD changer with the CUSTOM FILE function,
you can label each station/disc with a custom
name up to 8 characters (Station Memo/Disc
Memo).
If you label a station/disc, the name appears on
the list (page 9 or 11).
1
While receiving a station or playing a
disc that you want to label, press and
hold
(LIST) .
2
Press the /– button
repeatedly until the desired character
appears.
The character changes as follows:
A
y
B
y
C ...
y
0
y
1
y
2 ...
y
+
y – y ... y (blank space) y A
To move the digital indication, press
(SEL)
.
Repeat this operation until the entire name is
entered.
3
Press and hold (LIST) .
The labeling is complete and the display
returns to the normal play/reception mode.
To display the name, press (DSPL) during
reception or playback.
Tips
• To correct or erase a character, overwrite or enter
“
.”
• The Disc Memo always takes priority over any
prerecorded title.
• You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
• “REP-TRACK” and all shuffle play are suspended
until the labeling is complete.
With the card remote commander
In step 2, to select the character, press M or m .
Deleting the custom name
1 Select the radio, or the unit that has stored the
custom name you want to delete, then press
and hold
(LIST)
.
2 Press and hold
(DSPL)
.
The stored name will flash.
3 Press the /– button repeatedly to
select the name you want to delete.
4 Press and hold (SEL) .
The name is deleted. Repeat steps 3 and 4 to
delete other names.
5 Press and hold (LIST) .
The unit returns to normal play/reception
mode.
With the card remote commander
In step 3, to select the name, press M or m .
Adjusting setup items — SET
1
Press and hold (SEL) .
The setup display appears.
2
Press (SEL) repeatedly until the
desired item appears.
3
Press the /– button to select
the setting (example “ON” or “OFF”).
4
Press and hold (SEL) .
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press
<
or
,
.
The following items can be set (follow the page
reference for details):
“
z
” indicates the default settings.
CLOCK-ADJ (Clock Adjust)
(page 4)
BEEP
To set “ON” (
z
) or “OFF.”
SUB/REAR * 1
To switch the audio output.
– “SUB” (
z
): to output to a subwoofer.
– “REAR”: to output to a power amplifier.
DIM (Dimmer)
To change the brightness of the display.
– “AT” (
z
): to dim the display automatically
when you turn the lights on.
– “ON”: to dim the display.
– “OFF”: to deactivate the dimmer.
CONTRAST
To adjust the contrast of the display.
The contrast level is adjustable in 7 steps.