Sony CDX-R3410, Руководство по эксплуатации, Страница: 10 / 52

10
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 3, to adjust the selected item, press
< , M , ,
or m .
Labelling a station/disc
When you receive a station, or play a disc in a
CD changer with the CUSTOM FILE function,
you can label each station/disc with a custom
name up to 8 characters (Station Memo/Disc
Memo).
If you label a station/disc, the name appears on
the list (page 9 or 11).
1
While receiving a station or playing a
disc that you want to label, press and
hold
(LIST) .
2
Press the /– button
repeatedly until the desired character
appears.
To move the digital indication, press
(SEL)
.
A y B y C
...
y 0 y 1 y 2
...
y +
y
–
y
...
y
(blank space)
y
A
Repeat this operation until the entire name is
entered.
3
Press and hold (LIST) .
The labelling is complete and the display
returns to normal play/reception mode.
To display the name, press
(DSPL)
during
reception or playback.
Tips
• To correct or erase a character, overwrite or enter
“ .”
• The Disc Memo always takes priority over any
prerecorded title.
• You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
• “REP-TRACK” and all shuffle play are suspended
until the labelling is complete.
With the card remote commander
In step 2, to select the character, press
M or m .
Deleting the custom name
1 Select the radio, or the unit that has stored the
custom name you want to delete, then press
and hold
(LIST)
.
2 Press and hold
(DSPL)
.
The stored name will flash.
3
Press the /– button repeatedly to
select the name you want to delete.
4 Press and hold
(SEL)
.
The name is deleted. Repeat steps 3 and 4 to
delete other names.
5 Press and hold (LIST) .
The unit returns to normal play/reception
mode.
With the card remote commander
In step 3, to select the name, press
M or m .
Adjusting setup items
— SET
1
Press and hold (SEL) .
The setup display appears.
2
Press (SEL) repeatedly until the
desired item appears.
3
Press the /– button to select
the setting (example “ON” or “OFF”).
4
Press and hold (SEL) .
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press
< or , .
The following items can be set (follow the page
reference for details):
“
z
” indicates the default settings.
CLOCK-ADJ
(Clock Adjust)
(page 4)
BEEP To set “BEEP-ON” (
z
) or
“BEEP-OFF.”
SUB/REAR * 1 To switch the audio output.
– “SUB” (
z
): to output to a
subwoofer.
– “REAR”: to output to a
power amplifier.
DIM
(Dimmer) To change the brightness of the
display.
– “DIM-ON”: to dim the
display.
– “DIM-OFF” (
z
): to
deactivate the dimmer.
DEMO * 1
(Demonstration)
To set “DEMO-ON” (
z
) or
“DEMO-OFF” (page 4).
A.SCRL
(Auto Scroll)
To scroll long displayed items
automatically when the group/
track is changed.
– “A.SCRL-ON”: to scroll.
– “A.SCRL-OFF” (
z
): to not
scroll.