10
*1
When the unit is turned off.
*2
When the audio output is set to “SUB.”
Using optional equipment
Rotary commander RM-X4S
(CDX-R3350EE only)
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
The following controls on the rotary commander
require a different operation from the unit.
• PRESET/DISC control
To select preset stations; control CD, the same
as
(1)
/
(2)
–/+ on the unit (push in and rotate).
• VOL control
The same as the /– button on the unit
(rotate).
• SEEK/AMS control
The same as
(SEEK)
+/– on the unit (rotate, or
rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1
While pushing the VOL control, press and
hold
(SEL)
.
LPF
*
2
(Low
Pass Filter)
To select the cut-off frequency
“78HZ,” “125HZ” or “OFF”
(
z
).
SEL
DSPL
MODE
SEL
DSPL
MODE
OFF
ATT
SEL
SOURCE
DSPL
MODE
OFF
VOL
SEEK/AMS
PRESET
To increase
To decrease
