Sony CDX-MP70 Installation/Connection, Руководство по эксплуатации

Страница: 27 / 182

27
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for frequency and level.
1
Press
(SOURCE)
to select a source
(radio, CD, MD, or AUX).
2
Press (MENU) , then rotate the
. / > control dial until “EQ7 Tune”
appears.
3
Press the . / > control dial.
4
Press the – m or M + button to
select the desired equalizer curve,
then press the
. / > control dial.
Each time you press the – m or M +
button, the item changes.
5
Select the desired frequency and level.
1 Press the – m or M + button to
select the desired frequency.
Each time you press the – m or M +
button, the frequency changes.
62 Hz y 157 Hz y 396 Hz y 1.0 kHz
y 2.5 kHz y 6.3 kHz y 16 kHz
2 Rotate the . / > control dial to
adjust the desired level.
The level is adjustable by 1 dB steps from
–10 dB to +10 dB.
To restore the factory-set equalizer curve,
press the
.
/
>
control dial for 2
seconds.
6
Press the . / > control dial.
After the effect setting is complete, the
display returns to the normal playback mode.
Adjusting the front and rear
volume
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press the VOL control dial repeatedly
until “FAD” appears.
3
Rotate the VOL control dial to adjust
the volume of front/rear speakers.
After 3 seconds, the display returns to the
normal playback mode.
Adjusting the cut-off frequency for the
front/rear speakers
To match the characteristics of the installed
speaker system, you can select the cut-off
frequency of the speakers.
. / > control
dial
continue to next page t
VOL control dial
Cut-off frequency
Frequency (Hz)
Le
ve
l
off