35
Sound Setting
Setting the BBE MP
— BBE MP
The BBE MP process effectively adds warmth
and provides clear CD quality sound even from
heavily compressed MP3 material.
During playback on this unit, press
(5)
(BBE MP) to select “BBE MP ON.”
To cancel the BBE MP, select “BBE MP OFF.”
Note
The BBE MP function is available only when playing
back on this unit (when playing back on the optional
unit, BBE MP is not available).
Tips
• You can change the BBE MP setting, only when
playing back on this unit.
• You can also change the BBE MP setting by using
the main menu. During playback on this unit, press
(MENU)
, then set “BBE MP” in “PlayMode” to “ON”
or “OFF.”
Quickly attenuating the
sound
— ATT
Press
(ATT)
to select “ATT ON.”
To restore the previous volume level, select “ATT
OFF.”
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
Setting the Dynamic
Soundstage Organizer
— DSO
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers above the dashboard (virtual
speakers).
You can store the DSO setting for each source.
DSO mode and image of virtual speakers
*1
DSO 1
*2
DSO 2
*3
DSO 3
*4
DSO OFF
1
Press
(SOURCE)
to select a source
(radio, CD, MD, or AUX).
2
Press
(MENU)
.
3
Press
<
or
,
repeatedly to select
“Sound,” then press
(ENTER)
.
4
Press
<
or
,
repeatedly to select
“DSO,” then press
(ENTER)
.
5
Press
<
or
,
repeatedly to select the
desired mode, then press
(ENTER)
.
To cancel the DSO mode, select “OFF.”
6
Press
(MENU)
.
The display returns to the normal display.
Notes
• Depending on the type of car interior or type of
music, DSO may not have a desirable effect.
• If FM broadcasts are difficult to hear, set “DSO” in
“Sound” to “OFF.”
Tip
The sound effect of the DSO mode increases as the
number increases.
*3
*2
*1
*4
*4
*3
*2
*1
