21
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at the
time the problem began.
NO Music
The disc is not a music file.
t
Insert a music CD in this unit or MP3 playable
changer.
t
Connect a USB device with a music file in it.
NO Track Name
A track name is not written in the track.
Not Read
The disc information has not been read by the unit.
t
Load the disc, then select it on the list.
Not Ready
The lid of the MD changer is open or the MDs are not
inserted properly.
t
Close the lid or insert the MDs properly.
Not Supported
(USB Not Support)
The connected USB device is not supported.
t
Connect a USB device of Mass Storage Class
(page 15).
Offset
There may be an internal malfunction.
t
Check the connection. If the error indication
remains on in the display, consult your nearest
Sony dealer.
Over Load
USB device is overloaded.
t
Disconnect the USB device, then change the source
by pressing
(SOURCE)
.
t
Indicates that the USB device is out of order, or an
unsupported device is connected.
Push Reset
The CD unit and CD/MD changer cannot be operated
because of some problem.
t
Press the RESET button (page 4).
Read
The unit is reading all track and album/group
information on the disc/USB device.
t
Wait until reading is complete and playback starts
automatically. Depending on the disc/USB device
structure, it may take more than a minute.
“
” or “
”
During fast-forward or reverse, you have reached the
beginning or the end of the disc and you cannot go any
further.
“
”
The character cannot be displayed with the unit.
*1
If an error occurs during playback of a CD or MD,
the disc number of the CD or MD does not appear
in the display.
*2
The disc number of the disc causing the error
appears in the display.
Support site
If you have any questions or for the latest
support information on this product, please
visit the web site below:
http://esupport.sony.com
http://www.sony.com/xplod
