12
Adjusting setup items — MENU
1
Press
(MENU)
.
2
Rotate the volume control dial until the
desired menu item appears, then
press
(ENTER)
.
3
Rotate the volume control dial to
select the setting, then press
(ENTER)
.
The setting is complete.
4
Press
(MENU)
.
The display returns to normal play/reception
mode.
With the card remote commander
In steps 2 to 3: press
M
or
m
instead of the volume
control dial.
The following items can be set (follow the page
reference for details):
“
z
” indicates the default settings.
Setup
Display
Receive Mode
Using optional equipment
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit, you can listen on your car speakers.
The volume level is adjustable for any difference
between the unit and the portable audio device.
Follow the procedure below:
1
Turn off the portable audio device.
Clock Adjust
Beep
To set “on” (
z
) or “off.”
RM
(Rotary Commander)
To change the operative direction of the rotary
commander controls.
– “NORM” (
z
): to use the rotary commander in
the factory-set position.
– “REV”: when you mount the rotary
commander on the right side of the steering
column.
Auto Off
To shut off automatically after a desired time
when the unit is turned off: “NO” (
z
), “30 sec,”
“30 min” or “60 min.”
Auto Image
To set various display images.
– “All”: to step repeatedly through the display
images in all display modes.
– “Movie” (
z
): to display a movie.
– “SA”: to display the Spectrum Analyzer.
– “off”: to not display any image.
Info
(Information)
To display the items (depending on the source,
etc.).
– “Simple” (
z
): to not display any items.
– “All”: to display all items.
– “Clear”: to have items automatically
disappear.
Demo
*
1
(Demonstration)
To set “on” (
z
) or “off.”
Dimmer
To change the brightness of the display.
– “Auto” (
z
): to dim the display automatically
when you turn lights on.
– “on”: to dim the display.
– “off”: to deactivate the dimmer.
Illumination
To change the illumination color: “Blue” (
z
) or
“Red.”
Auto Scroll
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– “on” (
z
): to scroll.
– “off”: to not scroll.
Local
(Local seek mode)
– “off” (
z
): to tune normal reception.
– “on”: to only tune into stations with stronger
signals.
Mono
*
2
(Monaural mode)
To improve poor FM reception, select monaural
reception mode.
– “off” (
z
): to hear stereo broadcast in stereo.
– “on”: to hear stereo broadcasts in monaural.
IF
– “Auto” (
z
): to narrow automatically the
reception frequency to eliminate noise.
– “Wide”*
3
: to always hear FM stereo
broadcasts in stereo and with full the
frequency signal reception.
BTM
*1
When the unit is turned off.
*2
When FM is received.
*3
In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.
