17
Skipping albums, podcasts, genres,
playlists and artists
Repeat and shuffle play
1
During playback, press
(1)
(REP) or
(2)
(SHUF) repeatedly until the
desired setting appears.
After 3 seconds, the setting is complete.
To return to normal play mode, select “Repeat
off” or “Shuffle off.”
Operating an iPod directly
— Passenger control
You can operate an iPod connected to the dock
connector directly.
1
During playback, press and hold
(MODE)
.
“Mode iPod” appears and you will be able to
operate the iPod directly.
To exit the passenger control
Press and hold
(MODE)
.
Then “Mode Audio” will appear and the play
mode will change to “Resuming Mode.”
Notes
•
The volume can be adjusted only by the unit.
•
If this mode is canceled, the repeat setting will be
turned off.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
1
Press the select button.
2
Rotate the control dial until the
desired menu item appears, then
press the select button.
Depending on the setting, by rotating the
control dial again, further parameters can be
set.
3
Rotate the control dial to select the
setting, then press the select button.
4
Press
(BACK).
The setting is complete and the display
returns to normal play/reception mode.
The following items can be set:
To
Press
Skip
(3)
/
(4)
(ALBUM –/+)
[press once for each]
Skip
continuously
(3)
/
(4)
(ALBUM –/+)
[hold to desired point]
Select
To play
Repeat Track
track repeatedly.
Repeat Album
album repeatedly.
Repeat Podcast
podcast repeatedly.
Repeat Artist
artist repeatedly.
Repeat Playlist
playlist repeatedly.
Repeat Genre
genre repeatedly.
Shuffle Album
album in random order.
Shuffle Podcast
podcast in random order.
Shuffle Artist
artist in random order.
Shuffle Playlist
playlist in random order.
Shuffle Genre
genre in random order.
Shuffle Device
device in random order.
EQ3 Parametric Preset
Selects an equalizer curve from 7 music types.
EQ3 Parametric Tune
*
1
Custom equalizer settings.
Subwoofer Tune & LPF
Phase
Selects the phase (effective only when LPF is
on): “Normal,” “Reverse.”
FREQ
Selects the subwoofer cut-off frequency:
“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz,”
“OFF.”
Level
Adjusts the subwoofer volume: “+10dB” –
“0dB” – “–10dB.”
(“–
∞
” is displayed at the lowest setting.)
HPF & Speaker Select
Speaker
Selects the Speaker: “All,” “Front”, or “Rear.”
FREQ
Selects the cut-off frequency: “OFF,” “80Hz,”
“100Hz,” “120Hz,” “140Hz,” “160Hz.”
DSO
(Dynamic Soundstage Organizer)
Creates a more ambient sound field.
To select the DSO mode: “1,” “2,” “3,” or “off.”
The larger the number, the more enhanced the
effect.
continue to next page
t
