17
Using rear speakers as
subwoofer — Rear Bass
Enhancer
Rear Bass Enhancer enhances the bass sound
by applying the low pass filter setting
(page 18) to the rear speakers. This function
allows the rear speakers to work as a
subwoofer if one is not connected.
1
During reception/playback, press the
select button.
2
Rotate the control dial until “RB ENH”
appears, then press it.
3
Rotate the control dial to select from
“1,” “2” or “3,” then press it.
4
Press
(BACK).
Adjusting setup items
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until the desired
item appears, then press it.
3
Rotate the control dial to select the
setting, then press it.
*
The setting is complete.
4
Press
(BACK).
* For CLOCK-ADJ, TUNER-STP and BTM
settings, step 4 is not necessary.
The following items can be set depending
on the source and setting:
CLOCK-ADJ
(Clock Adjust) (page 4)
TUNER-STP
*
1
*
2
(Tuner Step) (page 4)
CT
(Clock Time)
Activates the CT function: “ON,” “OFF”
(page 10).
BEEP
Activates the beep sound: “ON,” “OFF.”
CAUT ALM
*
2
(Caution Alarm)
Activates the caution alarm: “ON,”
“OFF” (page 5).
AUX-A
*
2
(AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page 19).
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”
REAR/SUB
*
2
Switches the audio output: “SUB-OUT”
(subwoofer), “REAR-OUT” (power
amplifier).
Содержание CDX-GT44U
Страница 25: ......