10
iPod
Playing back iPod
By connecting an iPod to the dock connector at
the rear of the unit, you can listen on your car
speakers, while controlling the iPod from the
unit.
For details on the compatibility of your iPod, see
“About iPod” on page 14 or visit the support site.
Playing tracks
Before connecting the iPod to the dock
connector, turn down the volume of the unit.
1
Connect the iPod to the dock
connector.
The iPod will turn on automatically, and the
display will appear on the iPod screen as
below.*
The tracks on the iPod start playing
automatically from the point last played.
If an iPod is already connected, to start
playback press
(SOURCE)
repeatedly until
“IPOD” appears.
*
If the iPod was played back in the passenger control
last time, this will not appear.
2
Press
(MODE)
to select the play mode.
The mode changes as follows:
RESUMING
t
ALBUM
t
TRACK
t
PODCAST
*
t
GENRE
t
PLAYLIST
t
ARTIST
*
May not appear depending on iPod setting.
3
Adjust the volume.
Press
(OFF)
to stop playback.
Tips
•
When the ignition key is turned to the ACC position,
or the unit is on, the iPod will be recharged.
•
If the iPod is disconnected during playback, “NO
IPOD” appears in the display of the unit.
Resume mode
When the iPod is connected to the dock
connector, the mode of this unit changes to the
resume mode and playback starts in the mode set
by the iPod.
In resume mode, the following buttons do not
function.
–
(3)
(REP)
–
(4)
(SHUF)
Display items
A
Source (iPod) indication
B
Track name, Artist name, Album name, Track
number/Elapsed playing time, Clock
To change display items
B
, press
(DSPL)
.
Tip
When album/podcast/genre/artist/playlist is changed,
its item number appears momentarily.
Note
Some letters stored in iPod may not be displayed
correctly.
Support site
http://esupport.sony.com
http://www.sony.com/xplod
>
.
M
EN
U
