Sony CDX-GT270MP, Руководство по эксплуатации

Страница: 10 / 96

10
Sound Settings and
Setup Menu
Customizing the equalizer
curve — EQ3
“CUSTOM” of EQ3 allows you to make
your own equalizer settings.
1
During reception/playback, press

repeatedly to select
“CUSTOM,” then press (BACK).
2
Press

.
3
Rotate the control dial until “SOUND”
appears, then press it.
4
Rotate the control dial until “EQ3
LOW,” “EQ3 MID” or “EQ3 HIGH”
appears, then press it.
5
Rotate the control dial to adjust the
selected item, then press it.
The volume level is adjustable in 1 dB
steps, from –10 dB to +10 dB.
Repeat steps 4 and 5 to adjust the
equalizer curve.
To restore the factory-set equalizer
curve, press and hold

before
the setting is complete.
6
Press (BACK) twice.
The display returns to normal reception/
play mode.
Adjusting setup items
1
Press

, rotate the control dial
until the desired category appears, then
press it.
2
Rotate the control dial until the desired
item appears, then press it.
3
Rotate the control dial to select the
setting, then press it.
*
The setting is complete.
4
Press (BACK) to return to the
previous display.
* For CLOCK-ADJ and BTM settings, step 4 is
not necessary.
The following items can be set depending
on the source and setting:
GENERAL:
CLOCK-ADJ (Clock Adjust) (page 4)
CAUT ALM *
1
(Caution Alarm)
Activates the caution alarm: “ON,”
“OFF” (page 4).
BEEP
Activates the beep sound: “ON,” “OFF.”
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”
AUX-A * 1 (AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page 12).
REAR/SUB
*
1
Switches the audio output: “REAR-
OUT” (power amplifier), “SUB-OUT”
(subwoofer).
CT (Clock Time)
Activates the CT function: “ON,” “OFF”
(page 8).