6
CDX-GT20W/GT200/GT200E/GT200S/GT250S
• CDX-GT250S
6
Location of controls and basic operations
Main unit
Card remote commander
RM-X151
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A
OFF button
To power off; stop the source.
B
Volume control dial/select button 9
To adjust volume (rotate); select setup items
(press and rotate).
C
EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
D
Disc slot
To insert the disc (label side up), playback
starts.
E
Display window
F
Z
(eject) button
To eject the disc.
G
SCRL (scroll) button 8
To scroll the display item.
H
DSPL (display)/DIM (dimmer) button
4, 8
To change display items (press); change the
display brightness (press and hold).
I
GP
*
1
/ALBM
*
2
–/+ buttons
To skip groups/albums (press); skip groups/
albums continuously (press and hold).
J
(front panel release) button 4
CDX-GT250S
OFF
DSPL
SCRL
SEL
SOURCE
MODE
1
3
2
4
6
5
ATT
VOL
+
–
+
–
7
K
SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
L
SOURCE button
To power on; change the source (Radio/CD/
AUX).
M
BTM button 8
To start the BTM function (press and hold).
N
MODE button 8
To select the radio band (FM/AM).
O
RESET button
(located behind the front
panel)
4
P
Frequency select switch (located on
the bottom of the unit)
See “Frequency select switch” in the
supplied installation/connections manual.
Q
Number buttons
CD:
(3)
:
REP 8
(4)
:
SHUF 8
(6)
:
PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
R
SENS button
To improve weak reception: LOCAL/
MONO.
S
Receptor for the card remote
commander
T
AUX input jack 10
To connect a portable audio device.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
wa
<
(
.
)/
,
(
>
) buttons
To control CD/Radio, the same as
(SEEK)
–/+ on the unit.
ws
VOL (volume) +/– button
To adjust volume.
wd
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wf
SEL (select) button
To select items.
wg
M
(+)/
m
(–) buttons
To control CD, the same as
(GP/ALBM)
–/+
on the unit.
wh
Number buttons
To receive stored stations (press); store
sations (press and hold).
*1
When an ATRAC CD is played.
*2
When an MP3/WMA is played.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 12.
