23
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for different tone ranges.
1
Press
(MENU)
.
2
Press
(DISC/PRESET)
(+) or
(DISC/PRESET)
(–) repeatedly until
“EQ7 TUNE” appears, then press
(ENTER)
.
3
Press
(SEEK)
(+) or
(SEEK)
(–) to
select the desired equalizer curve,
then press
(ENTER)
.
Each time you press
(SEEK)
(+) or
(SEEK)
(–), the item changes.
4
Select the desired frequency and level.
1
Press
(SEEK)
(+) or
(SEEK)
(–) to
select the desired frequency.
Each time you press
(SEEK)
(+) or
(SEEK)
(–), the frequency changes.
62 Hz
y
157 Hz
y
396 Hz
y
1 kHz
y
2.5 kHz
y
6.3 kHz
y
16 kHz
2
Press
(DISC/PRESET)
(+) or
(DISC/PRESET)
(–) to adjust the
desired volume level.
The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.
To restore the factory-set equalizer curve,
press
(ENTER)
for 2 seconds.
5
Press
(MENU)
twice.
When the effect setting is complete, the
display returns to normal play mode.
Setting the Dynamic
Soundstage Organizer (DSO)
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers above the dashboard (virtual
speakers).
You can store the DSO setting for each source.
DSO mode and image of virtual speakers
*1
DSO-1
*2
DSO-2
*3
DSO-3
*4
DSO-OFF
1
Press
(SOURCE)
to select a source
(Radio, CD or MD).
2
Press
(DSO)
repeatedly until the
desired DSO setting appears.
Each time you press
(DSO)
, the DSO setting
changes.
To cancel the DSO function, select “DSO-
OFF.” After 3 seconds, the display returns to
normal play mode.
Notes
• Depending on the type of car interior or type of
music, DSO may not have a desirable effect.
• If FM broadcasts are difficult to hear, set DSO to
“OFF.”
*3
*2
*1
*4
*4
*3
*2
*1
