9
Radio
When the DAB band is selected for the first
time after replacing the car battery or
changing the connections, the initial scan
starts automatically. Allow the initial scan to
finish. (If interrupted, the initial scan will
start again the next time you select the DAB
band.) If no DAB station is stored by the
initial scan, perform an auto scan (page 10).
Tip
“ANT-POWER” is set to “ON” by default for
providing power to the DAB antenna (aerial)
supplied with this unit (page 27).
DAB
DAB (Digital Audio Broadcasting) is a
transmission system on terrestrial networks.
DAB stations bundle radio programs
(“services”) into an ensemble, and each
service contains one or more components.
The same service can sometimes be received
on different frequencies.
Searching for a service
manually
1
Press
repeatedly until
“TUNER” appears.
2
Press
repeatedly to select
“DAB1,” “DAB2” or “DAB3.”
3
Press
+/– to search within an
ensemble for a service; press and hold
+/– to search for different
ensembles.
Scanning stops when the unit receives a
service/ensemble. Search until the
desired service is received.
Storing a service manually
1
While receiving the service that you
want to store, press and hold a number
button (
to
) until “MEMORY”
appears.
Receiving stored services
1
After selecting the desired band, press a
number button (
to
).
Searching for a service by
name — Quick-BrowZer™
You can display a list of services for easy
searching.
1
During DAB reception, press
(BROWSE).
The unit enters Quick-BrowZer mode,
and the list of services appears.
2
Rotate the control dial to select the
desired service, then press it.
Reception starts.
To exit Quick-BrowZer mode, press
(BROWSE).
Setting DAB announcements
Specific types of DAB announcements that
you set can interrupt the currently selected
source.
1
During DAB reception, press and hold
the select button.
2
Rotate the control dial until
“ANNOUNCE” appears, then press it.
3
Rotate the control dial until the desired
type of announcement appears, then
press it.
