21
*1 When the unit is turned off.
*2 When FM is received.
*3 When the tuner is selected.
*4 During DAB reception.
*5 When the CD or USB is selected.
SOUND:
BEEP
Activates the beep sound: “ON,” “OFF.”
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”
AUX-A
*
1
(AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page 23).
REAR/SUB
*
1
Switches the audio output: “SUB-OUT”
(subwoofer), “REAR-OUT” (power
amplifier).
CT
(Clock Time)
Activates the CT function: “ON,” “OFF”
(page 11).
REGIONAL
*
2
Restricts reception to a specific region:
“ON,” “OFF” (page 11).
BTM
*
3
ANNOUNCE
(Announcement)
Enables broadcast announcements
(page 9).
FM LINK
*
4
Searches for and tunes the same program
automatically when the signal of the
current program is too weak: “ON,”
“OFF.”
ANT-PWR
(Antenna Power)*
1
*
4
Supplies power to the DAB antenna
(aerial) input terminal: “ON,” “OFF.”
AUTOSCAN
*
4
Performs an auto scan to update the list
of services in Quick-BrowZer mode.
ZAPPIN
*
5
ZAP TIME
(Zappin Time)
Selects the playback time for the
ZAPPIN function.
– “Z.TIME-1 (about 6 seconds),”
“Z.TIME-2 (about 15 seconds),”
“Z.TIME-3 (about 30 seconds).”
ZAP BEEP
(Zappin Beep)
Applies a beep sound between track
passages: “ON,” “OFF.”
EQ7 PRESET
EQ7 SETTING
POSITION
SET F/R POS
(Set Front/Rear Position)
ADJ POSITION
*
1
(Adjust Position)
SET SW POS
*
1
*
2
(Set Subwoofer
Position) (page 19)
BALANCE
Adjusts the sound balance: “RIGHT-15”
– “CENTER” – “LEFT-15.”
FADER
Adjusts the relative level: “FRONT-15” –
“CENTER” – “REAR-15.”
DM+
*
3
LOUDNESS
(Dynamic Loudness)
Reinforces bass and treble for clear
sound at low volume levels: “ON,”
“OFF.”
ALO
(Automatic Level Optimizer)
Adjust the playback volume level of all
playback sources to the optimum level:
“ON,” “OFF.”