19
Adjusting the equalizer curve
1
Press
(MENU)
.
2
Press
M
or
m
repeatedly until “EQ7
Tune” appears, then press
(ENTER)
.
3
Press
<
or
,
to select the desired
equalizer curve, then press
(ENTER)
.
Each time you press
<
or
,
, the item
changes.
4
Select the desired frequency and level.
1
Press
<
or
,
to select the desired
frequency.
Each time you press
<
or
,
, the
frequency changes.
62Hz
y
157Hz
y
396Hz
y
1.0kHz
y
2.5kHz
y
6.3kHz
y
16kHz
2
Press
M
or
m
to adjust the desired
volume level.
The volume level is adjustable in 1 dB
steps from –10 dB to +10 dB.
To restore the factory-set equalizer curve,
press
(ENTER)
for 2 seconds.
5
Press
(MENU)
twice.
After the effect setting is complete, the
display returns to normal playback mode.
Setting the Dynamic
Soundstage Organizer (DSO)
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers above the dashboard (virtual
speakers).
You can store the DSO setting for each source.
DSO mode and image of virtual speakers
*1
DSO 1
*2
DSO 2
*3
DSO 3
*4
DSO OFF
1
Press
(SOURCE)
to select a desired
source.
2
Press
(DSO)
repeatedly until the
desired DSO setting appears.
Each time you press
(DSO)
, the DSO setting
changes “DSO········1-3”, and “off.”
To cancel the DSO function, select
“DSO······off.” After 3 seconds, the display
returns to the normal playback mode.
Notes
• Depending on the type of car interior or type of
music, DSO may not have a desirable affect.
• If FM broadcasts are difficult to hear, set DSO to off.
*1
*1
*4
*3
*2
*3
*2
*4
