Sony CDX-C8850R, Руководство по обслуживанию

Страница: 22 / 86

22
FM RF signal
generator
antenna
terminal
set
level meter
10 k
Ω
REAR LINE OUT
0.01
µ
F
FM RF signal
generator
antenna
terminal
set
level meter
10 k
Ω
REAR LINE OUT
0.01
µ
F
FM Stereo Separation Adjustment (WIDE)
Setting :
SOURCE button : FM 98.00 (MHz)
Carrier frequency : 98.00 MHz
Output level
: 70 dB (3.2 mV)
Mode : stereo
Modulation : main : 1 kHz, 20 kHz deviation (26.7%)
sub
: 1 kHz, 20 kHz deviation (26.7%)
19 kHz pilot : 7.5 kHz deviation (10%)
FM stereo
Level meter Level meter
signal generator
connection reading (dB)
output channel
L-CH L-CH
A
B
R-CH L-CH Adjust RV3 on TU101
for minimum reading.
R-CH R-CH
C
D
L-CH R-CH Adjust RV3 on TU101
for minimum reading.
L-CH stereo separation :
A
–
B
R-CH stereo separation :
C
–
D
The separations of both channels should be equal.
Specification : Separation more than 24 dB
Adjustment Location : See page 24.
Procedure :
1. Set to the test mode. (See page 21.)
2. Push the SHIFT button.
3. Push the 4 button three times.
4. Push the 5 button once and set to WIDE mode.
FM Stereo Separation Adjustment (NARROW)
Setting :
SOURCE button : FM 98.00 (MHz)
Carrier frequency : 98.00 MHz
Output level
: 70 dB (3.2 mV)
Mode : stereo
Modulation : main : 1 kHz, 20 kHz deviation (26.7%)
sub
: 1 kHz, 20 kHz deviation (26.7%)
19 kHz pilot : 7.5 kHz deviation (10%)
FM stereo
Level meter Level meter
signal generator
connection reading (dB)
output channel
L-CH L-CH
A
B
R-CH L-CH Adjust RV4 on TU101
for minimum reading.
R-CH R-CH
C
D
L-CH R-CH Adjust RV4 on TU101
for minimum reading.
L-CH stereo separation :
A
–
B
R-CH stereo separation :
C
–
D
The separations of both channels should be equal.
Specification : Separation more than 18 dB
Adjustment Location : See page 24.
Procedure :
1. Set to the test mode. (See page 21.)
2. Push the SHIFT button.
3. Push the 4 button three times.
4. Push the 5 button twice and set to NARROW mode.